Selling: |
EonStor A04U G2421 |
|||
|
|
||||
|
|
||||
| ID | 1910 | |||
| Categories | Data Storage | | |||
|
|
||||
| Short description | EonStor A04U G2421 | |||
| Price (in €) | on request | |||
|
|
||||
| Manufacturer | Infortrend | |||
| Model | --- | |||
| Year of manufacture | 0000 | |||
| Warranty until | --- | |||
|
|
||||
| Long description | EonStor A04U G2421 * SCSI 320 host channel; transfer rate up to 320MBps per channel * Single RAID controller providing complete RAID functionality * Compact 1U space saving design * Supports up to four (4) SATA II, 3Gbps disk drives; backward compatible with SATA I disk drives * SATA NCQ (Native Command Queuing) support * Real time event notification by a variety of methods Host to Drive Model Configuration Form Factor SCSI to SATA A04U G2421 Single controller 1U Specifications RAID * Multiple arrays configurable with dedicated or global hot spares * RAID levels supported: RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD Online expansion by： * Adding new drives * Copying and replacing drives with drives of larger capacity Automatic background rebuilds Configurable stripe size and write policy per array Host Interface * One (1) SCSI 320 through two (2) VHDCI 68 pin SCSI ports; SCSI 160 backward compatible * Concurrent I/O commands * Tagged command queuing up to 256 * Variable stripe size per logical drive * Optimization setting for random or sequential I/Os Drive Interface * Four (4) 3Gbps SATA II, hot swappable drive trays that accommodate 1 inch pitch, 3.5 inch SATA I or SATA II disk drives * Automatic bad sector reassignment * Dedicated bandwidth to each connected drive System Components Single controller configuration provides full RAID functionalities * One (1) EonStor® compact 1U enclosure * One (1) RAID controller module * One (1) 256MB DDR RAM DIMM module (pre installed on the controller module) * One (1) 200W power supply unit * Two (2) single speed cooling fans * Four (4) hot swappable drive trays Management 10/100 BaseT Ethernet for out of band management One (1) RS 232C serial port for local access to firmware embedded utility Firmware embedded Java based RAIDWatch® GUI manager: * VT 100 terminal emulation via RS 232C * Telnet access via onboard Ethernet port * Cross platform, remote administration with SSL * Out of band access via Ethernet * Centralized management to monitor and administer multiple RAID units on one screen Configuration client for real time event notification over Email, Fax, LAN broadcast, SNMP Traps, MSN messenger, SMS short messages, and the configuration utility screen SNMP agent support： * SNMP trap event notification with plain text event message (no MIB file required) * SNMP V2.0 MIB file support with get and set commands Indicators Onboard alarm is triggered when one of the following modules fails: * RAID controller module * Cooling fans * Hard drive Module status LED indicators: * Two (2) per drive tray * Three (3) per LED panel * Four (4) per RAID controller module * Two (2) per Ethernet port Module failure alert through I²C bus Physical/Electrical Interfaces * Two (2) ports in one (1) dual stacked VHDCI SCSI connector * One (1) COM port (38400, n, 8, 1) * One (1) 10/100BaseT Ethernet port Cooling Fans Two (2) single speed cooling fans Size 40mm x 40mm x 28mm Normal Air Flow 13.4 CFM Environmental Specifications Temperature Operating temperature: 0° to 40°C Non operating temperature: 40º to 60ºC Relative Humidity Relative humidity: 5 ~ 95%, non condensing Altitude Operating: 0 ~ 12,000 ft Non operating: 0 to 40,000 ft Dimensions * Without handles: 445 (W) x 43.5 (H) x 511 (D) mm (17.5 x 1.7 x 20.1 inches) * With handles: 478 (W) x 43.5 (H) x 511 (D mm (18.8 x 1.7 x 20.1 inches) * Package: 582 (W) x 180 (H) x 718 (D) mm (22.9 x 7 x 28.3 inches) Weight * Net weight: 8 Kg (approx.) * Gross weight: 10 kg |
|||
|
|
||||
| Weight | --- | |||
| Dimensions (LxWxH) | --- | |||
|
|
||||
| Location | Germany | |||
| Region | NRW | |||
|
|
||||
|
|
||||
|
|
||||
| View this article on the vendor's web site. | ||||
