Buying: |
EonStor A12E G2121 |
|||
|
|
||||
|
|
||||
| ID | 1913 | |||
| Categories | Data Storage | | |||
|
|
||||
| Short description | EonStor A12E G2121 | |||
| Price (in €) | on request | |||
|
|
||||
| Manufacturer | Infortrend | |||
| Model | --- | |||
| Year of manufacture | 0000 | |||
| Warranty until | --- | |||
|
|
||||
| Long description | EonStor A12E G2121 * iSCSI Gigabit (Gb) Ethernet to SATA II RAID subsystem * Easy snap in storage over standard Ethernet infrastructures * Hardware XOR engine by dedicated ASIC266 chipsets * Support for iSCSI initiators compliant with IETF iSCSI standard (RFC 3720) * Microsoft Windows Server 2003 Virtual Disk Service (VDS) compatibility via Infortrend hardware provider * High availability, modular enclosure design * DDR Memory up to 2GB Host Interface Drive Interface Model Form Factor 1 Gb Ethernet ports SATA II A12E G2121 2 2U rack mount Specifications RAID Supports all standard RAID functionality Supports RAID 0, 1 (0+1), 3, 5, 10, 30, 50, NRAID and JBOD Configurable stripe size and write policy per array Intelligent Drive Handling: * In degraded mode: skips irreparable blocks to continue rebuild * In normal operation: data block verification and repair Host Interface * Two ( A12E G2121 2) 1 Gbps Ethernet * Concurrent I/O commands * Tagged command queuing up to 256 * Adaptive cache write policies Drive Interface * Twelve (12) 3.0Gbps SATA II, hot swappable drive trays * Accommodates 1 inch pitch, 3.5 inch SATA II or SATA I disk drives * SATA to PATA dongle kit available to accommodate PATA drives * Automatic bad sector reassignment * Dedicated bandwidth to each connected drive System Components * One (1) enhanced 2U enclosure * One (1) RAID and I/O management module * One (1) 256MB DDR RAM DIMM module (pre installed on the controller module) * Two (2), hot swappable, redundant, 350W power supply units * Three (3), hot swappable, redundant, cooling modules running in high/low speeds * Twelve (12), hot swappable drive trays * Two (2) front handles * Optional battery backup unit (BBU) Management One (1) RS 232C serial port for local access to firmware embedded utility * GUI, Telnet, and SSH system monitoring via Ethernet * RAIDWatch manager software for Windows and Linux platforms * Firmware embedded manager via RS 232C (audio jack) that is platform independent * Widest range of event notification methods including email, LAN broadcast, fax, SNMP traps, SMS, MSN, and ICQ Module status LED indicators: * Two (2) per drive tray * Nine (9) or per controller module * One (1) per power supply unit * One (1) per BBU module * One (1) per cooling module Module failure alert through I 2 C bus Interfaces * Two (2) RJ 45 ports for Cat5e copper Ethernet networks * One (1) COM port (38400, n, 8, 1) Power Supply Module Two (2) redundant hot swappable power supplies with PFC Input: 100VAC at 6A, 240VAC at 3A with PFC (auto switching) 47 to 63Hz Output: (Maximum output: 350 Watts) +12.0V 25A max. + 5.0V 25A max. + 3.3V 20A max. Cooling Module Three (3) redundant dual fan cooling modules Maximum air flow: High speed: 31.78 DFM Low speed: 20.13 CFM Environmental Specifications Operating temperature: 5° to 40°C Non operating temperature: 40º to 60ºC Relative humidity: 5~95%, non condensing Operating altitude: Operating: 0~12,000 ft Dimensions * Chassis without handles: 446(W) x 88(H) x 490(D) mm * Chassis with handles: 482(W) x 88(H) x 505(D) mm * Package: 344H x 600W x 670D mm System Weight * Net weight: 23.5kg * Gross weight: 25.0kg (without drives) |
|||
|
|
||||
| Weight | --- | |||
| Dimensions (LxWxH) | --- | |||
|
|
||||
| Location | Germany | |||
| Region | NRW | |||
|
|
||||
|
|
||||
|
|
||||
| View this article on the vendor's web site. | ||||
