Selling: |
Glunz & Jensen InterPlater 66 P plate processor Yom 2006 |
|||
|
||||
|
||||
ID | 2825 | |||
Categories | Developing Machines | | |||
|
||||
Short description | Glunz & Jensen InterPlater 66 P plate processor Yom 2006 | |||
Price (in €) | on request | |||
|
||||
Manufacturer | Glunz & Jensen | |||
Model | --- | |||
Year of manufacture | 0000 | |||
Warranty until | --- | |||
|
||||
Long description | Glunz & Jensen InterPlater 66 P plate processor Category: CTP Platesetters > Plateprocessors and Punches Manufacturer: Glunz & Jensen Not New Year 2006 Information: The processor 66 can Interplater positive (P version) and negative (N version) one sided offset plates in widths up to develop 660 mm. By using the standards of the "Soft Nylon Brush" technology that can edit Interplater 66 each available on the market records. The machine can be built and installed in an hour. The height and length of the output can be adjusted easily to his needs by the operator. Key features: High quality The unique feed system transports the film precisely in the developer No scratches possible Proven technology Possible without mixing the liquids during the development of the film Flexible Works with all standard film types that are available on the market Develop positive and negative one sided offset plates Efficient The closed immersion reduce the consumption of chemicals due to the reduced evaporation Anti evaporation lid Precise replenishment system which is constantly adjusted by system data Ease of use Auto Replenishing System Easy operation by control panel Easy to adjust parameters Maintenance Automatic self Gummierungseinheit Lightweight and easy to clean rack modules No tool for the rollers, brushes and bearings needed to remove Design easy to maintain Technical data: InterPlater 66/88 Positive and negative plate materials single sided offset plates Processing speed 40 140 cm / min. (16 55 "/ min.) Material width, min 10 cm (4 ") Material width, max 66 / 88 cm (26 "/ 34.6") Material length, min 330 mm (13.0 ") Material thickness 0.15 mm (0.006 ") 0.4 mm (0.016") Tank contents, developer 18 liters (4.75 gal U.S. gal) / 24 l (6.34 U.S.) Tank contents, gum Recirculating from container Adjustable temperature, developer 18 40 ° C (64.4 104 ° F) A cooling unit is recommended under certain conditions. Adjustable temperature, dryer 30 60 ° C (86 140 ° F) Brush speed 40 140 rpm Filter 1 x 10 " Water supply tap water, pressure min. 1 bar/15 psi Water consumption in Op max. 7.0 l / min. (1.85 U.S. gal / min) Wash Tap water Diameter of rollers 40 mm (1.6 ") Automatic Replenishment Area replenishment amount 000 500 ml/m2 ± 5% (0 0132 gal/m2 ± 5%) Level Control Yes Warm up time max., Developer min 0.3 ° C /. (Min 0.86 ° F /. Power 230 V, 1 phase, 50/60 Hz Power consumption, max 2.2 kW At 230 V Voltage tolerance: + 10% 15% (208 240 V) Start sensor operated Weight, empty 125 / 150 kg (276/331 lb) Approvals UL, c UL, and GOST R certified. Complies with CE standards. |
|||
|
||||
Weight | --- | |||
Dimensions (LxWxH) | --- | |||
|
||||
Location | Germany | |||
Region | NRW | |||
|
||||
|
||||
View this article on the vendor's web site. |